High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience.
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 7A and peak current of 18A can supply enough power for your servos to operate efficiently.
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. ? Quicker response to the throttle change. ? Higher driving efficiency, longer flight time. ? Lower ESC temperature and a more reliable operation.
Specifications
Product Name
Platinum HV 130A OPTO V4
Product Number
30209201
Type
Brushed/Brushless
BL
High Voltage/Regular
High Voltage
Cont./Peak Current
130A/160A
Input Voltage
6-14S LiPo
BEC Output
No
Wires & Connectors
Input Wires
Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires
Black-12AWG-100mm*3
Input Connectors
Output Connecotors
(Note: All the wire length above is the original length not the length you see from the outside.)
ESC Programing via
Transmitter
Not Supported
LED Program Card
LED Program Box
LCD Program Box
Supported
WiFi Module
OTA Programmer
Program Port
Separate Program Port
Firmware
Firmware Upgrade
Size & Weight
Size
101.0x45.5x27.0mm
Weight
154g
Applications
550-600 Class Heli (Main Blade: 550-690mm).90-.140 Class Fixed-wing Airplane, 2m FAIF3A & 3DEDF (with Diameter?105mm)
© 2022 by the Tyler Gray Models. All Rights Reserved
